To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 5359-21 and is the answer not in the manual?
Guidelines for maintaining a safe and clean work environment.
Ensuring safe operation with electrical tools and cords.
Protective actions for the operator during tool use.
Specific safety instructions for tool handling and label upkeep.
Technical details and capacities of the rotary hammers.
Identification and description of tool components and features.
Proper connection of grounded and double insulated tools.
Selecting and using appropriate extension cords for power tools.
Explanation of symbols used on tools and in documentation.
How to position and secure the side handle.
Procedure for setting the desired drilling depth.
Steps for attaching and removing bits and chisels.
Choosing between drill, rotary hammer, and hammer-only modes.
Instructions for drilling larger holes with core bits.
How to operate the tool's trigger and speed settings.
Guidance on routine maintenance, cleaning, and servicing procedures.
Details on the limited warranty and available compatible accessories.
Guidelines for maintaining a safe and clean work environment.
Ensuring safe operation with electrical tools and cords.
Protective actions for the operator during tool use.
Specific safety instructions for tool handling and label upkeep.
Technical details and capacities of the rotary hammers.
Identification and description of tool components and features.
Proper connection of grounded and double insulated tools.
Selecting and using appropriate extension cords for power tools.
Explanation of symbols used on tools and in documentation.
How to position and secure the side handle.
Procedure for setting the desired drilling depth.
Steps for attaching and removing bits and chisels.
Choosing between drill, rotary hammer, and hammer-only modes.
Instructions for drilling larger holes with core bits.
How to operate the tool's trigger and speed settings.
Guidance on routine maintenance, cleaning, and servicing procedures.
Details on the limited warranty and available compatible accessories.
General| Type | Rotary Hammer |
|---|---|
| Voltage | 120V |
| No Load RPM | 0-1, 100 RPM |
| Power Source | Corded Electric |
| No Load Speed | 0-1, 100 RPM |
| Cord Length | 8 ft |
| Chuck Type | SDS Plus |
| Amps | 8.5 Amps |
| Bit Size | 1-1/8 in |
