To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2753-20 and is the answer not in the manual?
Keep work area clean, well lit, and free from flammable materials. Ensure bystanders are kept away.
Match plugs to outlets, avoid earthed surfaces, protect cords from damage, and use GFCI for wet conditions.
Stay alert, dress properly, use eye protection, and prevent unintentional starting of the tool.
Use the correct power tool for the application and do not force it. Ensure the switch functions correctly.
Maintain tools properly, keep cutting edges sharp, and store idle tools out of reach of children.
Recharge with specified chargers and use only designated battery packs to prevent injury and fire.
Start tool by pulling trigger; vary speed with pressure. Electric brake stops tool instantly.
Practice to achieve desired torque without excessive impacting. Check tightness with a torque wrench.
Remove battery pack before changing accessories. Use only recommended accessories for safe operation.
Clean tool vents, keep handles clean, and never immerse the tool in liquid. Contact service for repairs.
Details warranty periods, exclusions like misuse or alterations, and required proof of purchase.
Contact information for technical questions, service, repair, and warranty in the USA.
Contact information for technical questions, service, repair, and warranty in Canada.
Contact information for technical questions, service, repair, and warranty in Mexico.
Keep work area clean, well lit, and free from flammable materials. Ensure bystanders are kept away.
Match plugs to outlets, avoid earthed surfaces, protect cords from damage, and use GFCI for wet conditions.
Stay alert, dress properly, use eye protection, and prevent unintentional starting of the tool.
Use the correct power tool for the application and do not force it. Ensure the switch functions correctly.
Maintain tools properly, keep cutting edges sharp, and store idle tools out of reach of children.
Recharge with specified chargers and use only designated battery packs to prevent injury and fire.
Start tool by pulling trigger; vary speed with pressure. Electric brake stops tool instantly.
Practice to achieve desired torque without excessive impacting. Check tightness with a torque wrench.
Remove battery pack before changing accessories. Use only recommended accessories for safe operation.
Clean tool vents, keep handles clean, and never immerse the tool in liquid. Contact service for repairs.
Details warranty periods, exclusions like misuse or alterations, and required proof of purchase.
Contact information for technical questions, service, repair, and warranty in the USA.
Contact information for technical questions, service, repair, and warranty in Canada.
Contact information for technical questions, service, repair, and warranty in Mexico.
General| Speed Settings | 3 |
|---|---|
| Weight | 2.1 lbs |
| Battery System | M18 |
| Voltage | 18V |
| LED Light | Yes |
| Tool Warranty | 5 Years |
| Battery Type | Lithium-Ion |
| Drive Size | 1/4 inch hex |
| Anvil Type | 1/4" Hex Quick Release |
