Milwaukee 2762-20 User Manual

Cat. No. / No de cat.
2762-20, 2763-20, 2764-20, 2765-20
M18™ FUEL™ 7/16" HEX IMPACT WRENCHES, 1/2" IMPACT
WRENCHES & 3/4" IMPACT WRENCH
CLÉS À CHOCS HEXAGONAL 11 mm (7/16"), CLÉS À CHOCS
DE 1/2" & CLÉS À CHOCS DE 3/4" DE M18™ FUEL™
LLAVES DE IMPACTO HEXAGONAL DE 11 mm (7/16"), LLAVES
DE IMPACTO DE 1/2" & LLAVES DE IMPACTO DE 3/4" DE
M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee 2762-20 Specifications

General

Brand	Milwaukee
Model	2762-20
Category	Impact Driver
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean and well lit. Avoid explosive atmospheres. Keep children and bystanders away.

Electrical Safety

Match plugs to outlets. Avoid body contact with grounded surfaces. Do not expose to rain/wet conditions. Use outdoor extension cords.

Personal Safety

Stay alert. Use personal protective equipment. Prevent unintentional starting. Remove wrenches before use.

Power Tool Use and Care

Use the correct power tool. Maintain tools and accessories. Disconnect power before adjustments. Store idle tools safely.

Battery Tool Use and Care

Recharge only with the specified charger. Use only designated battery packs. Do not use damaged or modified batteries.

Service and Specifications

Symbology

Explains symbols used in the manual, such as Volts, DC, RPM, IPM, and UL Listing.

Specifications

Lists technical details like Volts, Battery Type, Cat. No., Anvil Type, RPM, and IPM for different models.

Functional Description

Identifies key parts of the tool, including the anvil, LED, control switch, trigger, and drive control.

Assembly and Operation

Assembly Instructions

Instructions for recharging batteries, inserting/removing batteries, and attaching/removing accessories.

Operating the Tool

Guidance on using the drive control, control switch, and starting/stopping the tool.

Maintenance and Service Information

Impacting Techniques

Tips to prevent fastener damage and achieve optimal torque.

Maintenance and Cleaning

Procedures for tool maintenance, cleaning, and when to contact service.

Accessories and Service Contacts

Information on recommended accessories and contact details for service in the US and Canada.