Milwaukee 2782-20 User Manual

Cat. No. / No de cat.
2782-20
M18 FUEL™ 5-3/8" / 5-7/8" METAL SAW
135 mm (5-3/8") / 150 mm (5-7/8") SCIE À MÉTAUX M18 FUEL™
SIERRA PARA CORTAR METAL, 135 mm (5-3/8") / 150 mm (5-7/8")
DE M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee 2782-20 Specifications

General

Type	Reciprocating Saw
Voltage	18V
No Load Speed	0-3, 000 SPM
Blade Clamp	Keyless
LED Light	Yes
Power Source	Cordless
Motor Type	Brushless
Switch Type	Variable Speed Trigger
Stroke Length	1-1/8 inches
Battery Type	M18

Summary

General Power Tool Safety Warnings

Work Area Safety

Safety guidelines for maintaining a clean and safe work environment, including avoiding hazards.

Electrical Safety

Precautions for preventing electric shock, including avoiding wet conditions and using proper cords.

Personal Safety

Power Tool Use and Care

Service

Specific Safety Rules for Metal Saw

Detailed safety instructions for performing cuts, focusing on blade handling and workpiece support.

Kickback Causes and Related Warnings

Lower Guard Function

Instructions on how to check and maintain the proper operation of the saw's lower guard for safety.

Installing and Removing Blades

Adjusting Depth

Operation

Kickback Causes and Related Warnings

Explanation of kickback and essential precautions to avoid it during saw operation.

General Operation

Operational Features

Pocket Cutting