EasyManua.ls Logo

Milwaukee M18 FUEL 2729-20 User Manual

Milwaukee M18 FUEL 2729-20
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR'S MANUAL
WARNING To reduce the risk of injury, user must read and understand operator's manual.
Cat. No.
2729-20
M18™ FUEL™ DEEP CUT BAND SAW
Question and Answer IconNeed help?

Do you have a question about the Milwaukee M18 FUEL 2729-20 and is the answer not in the manual?

Milwaukee M18 FUEL 2729-20 Specifications

General IconGeneral
Voltage18V
Tool-Free Locking ShoeYes
Variable SpeedYes
TypeBand Saw
Battery SystemM18
Cutting Capacity5 inches
Cut Capacity5 x 5 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean and well lit. Avoid explosive atmospheres. Keep children and bystanders away from operating power tool.

Electrical Safety

Match plugs to outlets. Avoid body contact with earthed surfaces. Do not expose to rain or wet conditions. Do not abuse the cord.

Personal Safety

Stay alert. Use personal protective equipment. Prevent unintentional starting of the power tool.

Power Tool Use and Care

Do not force the tool. Do not use if switch is faulty. Disconnect power before adjustments. Store idle tools properly.

Battery Tool Use and Care

Recharge with specified charger. Use only designated battery packs. Avoid damage and extreme temperatures.

Service and Specific Rules

Service

Have power tool serviced by qualified person. Never service damaged battery packs. Contact Milwaukee service facility.

Specific Safety Rules for Band Saw

Hold by insulated surfaces. Keep hands away from blade. Use common sense and be cautious when using tools.

Symbology and Specifications

Explanation of symbols, product specifications, capacities, and operating temperature for the band saw.

Operation and Assembly

Blades and Blade Selection

Details on required blade dimensions and factors for selecting the correct pitch for cutting operations.

LED Worklight

The LED worklight turns on automatically when the trigger is pulled and turns off automatically.

Speed Dial

Setting the maximum speed using the speed dial located on the side of the handle.

Starting and Stopping

Instructions on how to start, stop, and vary the speed of the band saw using the trigger and lock-off button.

Changing Blades

Procedure for safely removing and installing new blades, including tensioning and seating.

Assembly

Instructions for removing and inserting the battery pack into the tool.

Maintenance

Maintaining Tool

Regular maintenance program to keep tool, battery pack, and charger in good repair. Inspect for issues.

Cleaning

How to clean dust and debris from vents and handles using mild soap and a damp cloth.

Repairs

Instructions for returning the tool, battery pack, and charger for repairs to the nearest service center.

Related product manuals