Milwaukee M18 FUEL 2733-20 User Manual

Cat. No. / No de cat.
2733-20
M18 FUEL™ 7-1/4" DUAL BEVEL COMPOUND SLIDING MITER SAW
SCIE À ONGLETS COMPOSÉS COULISSANTE À DOUBLE
BISEAU DE 184 mm (7-1/4") M18 FUEL™
SIERRA DE INGLETE COMPUESTA DESLIZANTE DE BISEL DUAL
DE 184 mm (7-1/4") M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 FUEL 2733-20 Specifications

General

Brand	Milwaukee
Model	M18 FUEL 2733-20
Category	Saw
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Personal Safety

Battery Tool Use and Care

Specific Miter Saw Safety Rules

Workpiece Handling and Support

Ensuring proper support and secure handling of the workpiece during cutting operations.

Safe Blade Operation Practices

Practices for safe blade interaction and controlling the saw during cuts.

Miter Saw Setup and Alignment

Symbology and Component Identification

Miter Saw Parts Overview

Detailed list and illustration of the miter saw's various parts and features.

Operation and Adjustments

Blade Selection and Installation

Guidance on choosing, installing, and changing saw blades.

No Hand Zone and Workpiece Safety

Adhering to safety zones and selecting workpieces for safe cutting.

Miter and Bevel Angle Adjustments

Workpiece Support Techniques

Adjusting the Bevel Angle

Adjusting the Miter Angle

Fence Adjustment and Guards

Cutting Procedures

Starting and Stopping the Tool

Properly starting, stopping, and waiting for the blade to stop.

Making a Chop Cut

Step-by-step instructions for performing standard vertical cuts.

Making a Sliding Cut

Instructions for performing cross cuts using the sliding mechanism.

Applications and Material Cutting

Cutting Crown Molding

Methods and settings for cutting crown molding flat or nested.