Need help?Do you have a question about the Milwaukee M18 FUEL 2736-20 and is the answer not in the manual?
General safety warnings for power tool operation, including work area, electrical, and personal safety.
Best practices for operating and maintaining power tools and battery-powered tools.
Safety instructions regarding the use and maintenance of blade guards and related devices.
Critical safety advice for various cutting operations to prevent injury.
Explanation of kickback causes and related safety precautions.
Important warnings and precautions for operating the table saw safely.
Explanation of symbols used in the operator's manual.
Technical data and specifications for the table saw.
Steps for unpacking, mounting, and preparing the table saw for use.
Instructions for battery insertion and understanding table saw components.
Procedure for safely removing and installing the throat plate for different operations.
Instructions for changing the riving knife for different cutting operations.
Procedure for installing anti-kickback pawls for through-cutting operations.
Guidance on setting the appropriate blade depth for cuts.
Steps for installing, moving, and locking the rip fence.
Instructions for using rip fences, extending fences, and auxiliary fences.
Procedures for changing blade angle, using miter gauge, and dust management.
Guidelines for safely moving and storing the table saw.
Information on the ONE-KEY™ system and its features.
Explanation of factors that can lead to kickback when operating the saw.
Methods and precautions to prevent kickback during operation.
Safe procedures for starting and stopping the table saw.
Instructions for making custom jigs and featherboards for safer cutting.
Guidance on using push sticks and blocks for safe workpiece feeding.
Overview of tool uses and steps for clearing jams and dust chutes.
Proper placement and securing of a featherboard for effective workpiece control.
General guidelines and best practices for making various cuts with the table saw.
Step-by-step instructions for performing a straight cross cut operation.
Detailed steps for making a rip cut along the grain of the wood.
Procedures for making miter cuts and angled cross cuts.
Instructions for making angled rip cuts and compound miter cuts.
Safety and procedure for cutting large panels on the table saw.
Steps for making cuts that do not pass completely through the workpiece.
Instructions for making dado cuts using specialized accessories.
Common problems, their causes, and recommended solutions for the table saw.
Procedure for adjusting the throat plate for a smooth and accurate cut.
How to check and adjust the blade angle to 0° and 45° for precise cuts.
Procedure to ensure the blade is square to the miter slots.
Steps to align the rip fence parallel to the saw blade and miter slots.
Procedure for checking and adjusting the riving knife alignment with the saw blade.
Information on the internal battery for ONE-KEY™ functionality and its replacement.
Guidelines for cleaning the tool, handles, and vents.
To Next Page
General