To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 4096 and is the answer not in the manual?
General safety guidelines for the work environment.
Safety precautions related to electrical connections and tools.
Guidelines for operator's personal safety and protective equipment.
Proper usage, maintenance, and care of power tools.
Information on tool servicing and repair.
Description of the tool's components and models.
Explanation of grounded tools and three-prong plugs.
Explanation of double-insulated tools and two-prong plugs.
Advice on selecting and using extension cords.
Table showing recommended wire gauge for extension cords.
Instructions for assembling Dymorigs and Vac-U-Rig stands.
Steps to move the handle to the opposite side of the stand.
Steps for attaching the meter box to the Dymorig stand.
Procedure for adjusting gib screws for cradle rigidity.
How to select appropriate gear speeds for drilling.
Steps to assemble the water shut-off valve.
Securing methods for horizontal coring operations.
Methods for securing the rig for vertical coring.
Information on using an optional telescoping assembly.
How to use an expansion-type anchor for securing the rig.
Steps for assembling and using the vacuum system.
Using expansion anchor for specific models.
How to use the optional telescoping assembly.
Importance and method for supplying adequate water flow.
Explanation of the meter box and ammeter functions.
Explanation of shear pin and clutch mechanisms.
Techniques for retrieving cores and performing deep coring.
Best practices for operator technique during coring.
Role and importance of water in the coring process.
General equipment considerations for optimal performance.
Guidelines for using new diamond core bits.
Causes and prevention of bit glazing and motor shear pin issues.
General guidelines for maintaining the power tool.
Instructions for lubricating rack and pinion gears.
Steps for lubricating the spindle on shear pin models.
Procedure for replacing worn vacuum pad gaskets.
How to clean the vacuum pump filter.
General cleaning instructions for the tool.
Information regarding tool repairs.
General