Milwaukee M12 2415-20 User Manual

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No de cat.
2415-20
M12™ CORDLESS 3/8'' RIGHT ANGLE DRILL
10 mm (3/8") POIGNÉE COUDEE ANGLE DROIT M12™
TALADROS EN ANGULOS RECTOS, DE 10 mm (3/8") DE M12™
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.

Milwaukee M12 2415-20 Specifications

General

Brand	Milwaukee
Model	M12 2415-20
Category	Drill
Language	English

Summary

GENERAL POWER TOOL SAFETY WARNINGS

Work Area Safety

Keep the work area clean, well-lit, and free from distractions.

Electrical Safety

Avoid body contact with grounded surfaces and use proper cords.

Personal Safety

Stay alert, use PPE, and prevent unintentional starting.

Power Tool Use and Care

Use correct tools, maintain them, and store them properly.

Battery Tool Use and Care

Recharge with specified chargers and use designated battery packs.

SPECIFIC SAFETY RULES

FUNCTIONAL DESCRIPTION

Tool Components Overview

Identifies key parts like chuck, switches, fuel gauge, and clutch dial.

ASSEMBLY

Battery Pack Installation and Removal

OPERATION

Bit Installation and Chuck Operation

Adjustable Clutch and Torque Settings

How to adjust the clutch for driving screws and understand torque limits.

Control Switch and Speed Adjustment

APPLICATIONS

Drilling and Screw Driving Techniques