To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M12 CPD and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Chuck Type | Keyless |
| Speed Settings | 2 |
| No Load Speed Gear 1 | 0-400 RPM |
| No Load Speed Gear 2 | 0-1, 500 RPM |
| Battery pack capacity | 2.0 Ah |
| Battery Type | Lithium-Ion |
| Tool Length | 7-3/4 in |
Critical step to remove the battery pack before performing any work on the machine.
Instructions for inserting and removing drill bits into the tool's chuck.
How to start, stop, and adjust the speed of the power tool using the trigger and selector.
Instructions for engaging the tool's locking mechanism.
Selecting between low (turtle) and high (rabbit) speed modes.
Adjusting the torque clutch for drilling and screwdriving tasks.
Detailed technical specifications for M12 CDD and M12 CPD models.
Information on noise levels, vibration values, and hearing protection.
Essential safety warnings and instructions for safe operation.
Specific safety guidelines for drill and screwdriver functions.
Further safety measures and working advice for optimal use.
