Need help?Do you have a question about the Milwaukee M12 FPD and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Max Torque | 44 Nm |
| Chuck Size | 13 mm |
| Speed Settings | 2 |
| Chuck Type | Keyless |
| Max Drilling Wood | 35 mm |
| Max Drilling Steel | 13 mm |
| Max Drilling Masonry | 13 mm |
| No Load Speed Gear 1 | 0-450 RPM |
| No Load Speed Gear 2 | 0-1700 RPM |
| Battery Platform | M12 |
| Length | 190 mm |
| Battery Type | Lithium-Ion |
| Impact Rate | 0 - 25, 500 ipm |
| Weight | 1.5 kg |
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions regarding power tool plugs, cords, and exposure to water.
User vigilance, protective equipment, and preventing unintentional starting.
Proper usage, tool maintenance, and accessory care.
Safe practices for charging and using battery packs.
Safety advice for impact drilling and using auxiliary handles.
Precautions against short circuits, fire, and fluid exposure.
Key performance metrics and technical details of the tool.
Identification and purpose of the tool's various parts.
Explanation of symbols and regulatory marks used in the manual.
Procedures for removing and inserting the battery pack.
How to choose the tool's operating mode (hammer, drill, drive).
Steps for securely fitting drill or driver bits into the chuck.
Instructions on how to check the remaining battery charge.
How to adjust the tool's operating speed.
Operating the forward, reverse, and lock functions.
How to start, stop, and vary tool speed using the trigger.
How the tool protects the battery from damage.
Guidance for drilling in different materials.
Tips for driving screws and nuts effectively.
Procedures for keeping the tool in good working order and cleaning.
Information on seeking professional repair services for the tool.
Information on compatible accessories and where to find them.
Details on the product warranty coverage for Australia and New Zealand.
How to contact for service, dealers, and customer support.
To Next Page