Milwaukee 4210-1 User Manual

Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4253-1
4262-1
4292-1
4297-1
HEAVY-DUTY DRILL MOTORS, ELECTROMAGNETIC DRILL STANDS,
ELECTROMAGNETIC DRILL PRESSES
PERCEUSES ÉLECTROMAGNÉTIQUES, COLONNES ET MOTEURS DE
PERCEUSES EXTRA ROBUSTES
MOTORES PARA TALADRADORAS EXTRARESISTENTES, BASES
ELECTROMAGNÉTICAS PARA TALADRADORAS, PRENSAS TALADRADORAS
ELCTROMAGNÉTICAS
Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4204-1
4206-1
4208-1
4209-1
4210-1
Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4202
4203
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.

Milwaukee 4210-1 Specifications

General

Voltage	120V
Chuck Size	1/2 Inch
Chuck Type	Keyed
Cord Length	8 ft
Drilling Capacity in Steel	1/2 Inch
Drilling Capacity in Wood	1-1/2 Inch
Amperage	7.0A
No Load Speed (RPM)	0-1, 100 RPM
Bit Capacity	1/2 in.

Summary

General Safety Rules

General Safety Precautions

Covers work area, electrical, and personal safety guidelines.

Power Tool Use and Care

Proper usage, maintenance, and storage of power tools.

Specific Safety Rules for Mag Stands

Safety Chain

Importance of using a safety chain for overhead drilling.

Danger Warning

Keep hands away from moving parts and chips.

Functional Description

Specifications

Grounding

Grounded Tools

Explanation of three-prong plugs and grounding safety.

Extension Cords

Extension Cord Guidelines

Recommendations for safe and effective extension cord use.

Operation

Magnetic Holding Features

Details on holding force, backing plates, and surface prep.

Safety Chain Usage

Instructions for using the safety chain during operation.

Operation Details

Magnet Button and Interlock

How to operate the magnet and drill interlock system.

Typical Operation Steps

Applications

Tapping Procedure

Using Twist Drills

Applications Details

Using Milwaukee Steel Hawg Cutters

Cutting Procedure

Lubrication