To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee TRAPSNAKE 49-16-2573 and is the answer not in the manual?
General| Model | 49-16-2573 |
|---|---|
| Category | Power Tool |
| Cable Length | 25 ft |
| Replacement Head | Yes |
| Material | Steel |
| Cable Diameter | 1/2 in |
Keep work area clean and well lit. Avoid explosive atmospheres. Keep children and bystanders away.
Ensure proper plug match, avoid grounded surfaces, protect from rain/wet conditions, do not abuse cord.
Stay alert, use PPE, prevent unintentional starting.
Recharge with specified charger. Use only designated battery packs. Avoid abusive conditions.
Use gloves, don't stop cutter while cable turns, use PPE for drains, practice good hygiene, use correct drain cleaner.
Provides a chart for selecting the correct cable size and style based on pipe diameter for proper fit.
Step-by-step guide for attaching the M12™ driver to the auger for powered operation.
Instructions for using the auger with the powered driver, including switch and speed control.
How to engage forward, reverse, and lock the trigger using the directional switch.
How to start, stop, and adjust the speed of the Trapsnake™ Driver by controlling the trigger.
Details methods for feeding the auger into a drain, including manual and driver-assisted techniques.
Procedures for clearing obstructions when the cable lock is not engaged.
Procedures for clearing obstructions when the cable lock is engaged.
Safety precautions and steps for installing a new cable into the auger drum assembly.
Step-by-step process to detach the old cable from the drum, including safety warnings.
Detailed instructions for fitting a new cable into the drum assembly, ensuring correct orientation.
Procedures for flushing and drying drain cleaning cables after use to maintain performance and longevity.
