Need help?Do you have a question about the Milwaukee 48-08-0260 and is the answer not in the manual?
Adjust the dampening screw to contact the front pulley guard. Note: overtightening reduces blade tension.
Adjust the blade to be at a 90° angle with the work surface. Ensure vertical alignment.
Adjust the swivel bracket to ensure the blade is parallel to the work surface for straight cuts.
Assemble the vice by inserting the swivel pin and aligning the chain hook.
Always wear safety goggles or safety glasses with side shields when cutting. Follow safety notes.
Use only identical replacement parts. Take the tool to an authorized service center for repairs.
Read and save these safety instructions for future reference to ensure safe operation.
Keep your work area clean and well lit. Avoid explosive atmospheres.
Ensure proper grounding and avoid contact with earthed surfaces. Protect from water.
Stay alert, wear PPE, and prevent unintentional starting. Dress properly.
Do not force the tool, use the correct tool, maintain cutting tools, and follow instructions.
Recharge only with specified charger, keep away from metal objects, and handle with care.
Have your power tool serviced by a qualified repair person using identical replacement parts.
Warranty repairs are free of charge and do not extend or restart the warranty period.
Extended warranty for Milwaukee tools purchased after April 2009, requires online registration within 4 weeks.
Warranty exclusions include misuse, improper maintenance, unauthorized repairs, and normal wear.
Return the complete product to Techtronic Industries or authorized service agents for repair.
Limitation of liability for consequential, incidental, or indirect damages.
To Next Page
General