Milwaukee 8988-20 User Manual

Cat. No. / No de cat.
8988-20
VARIABLE TEMPERATURE HEAT GUN WITH LCD DISPLAY
PISTOLET THERMIQUE À TEMPÉRATURE VARIABLE AVEC
AFFICHEUR ACL
PISTOLA DE CALOR DE TEMPERATURA VARIABLE CON
PANTALLA LCD
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee 8988-20 Specifications

General

Model	8988-20
Voltage	18V
Category	Power Tool
Type	Impact Wrench
No Load Impacts Per Minute	0-2, 100 IPM
Battery System	M18
Power Source	Cordless

Summary

Variable Temperature Heat Gun with LCD Display

General Power Tool Safety Warnings

Electrical Safety

Electrical safety precautions for power tool operation.

Personal Safety

Personal safety guidelines for operating power tools.

Power Tool Use and Care

Important Safety Instructions for Heat Guns

General Heat Gun Safety

Crucial safety warnings and precautions for operating heat guns.

Hot Surfaces and Cooling

Warnings about hot components and cooling procedures for safety.

Work Area Hazards

Identifies hazards like flammable materials and dust in the work area.

Tool Use Precautions

Important Safety Instructions for Removing Paint

Lead Paint Hazards

Warnings about lead paint and its removal precautions.

Work Area Preparation

Protective Equipment

Recommended personal protective equipment for paint removal.

Grounding and Tool Types

Grounded Tools (Three-Prong Plugs)

Double Insulated Tools (Two-Prong Plugs)

Functional Description

Assembly and Configuration

Configuration Mode Overview

Steps to enter and navigate the tool's configuration mode.

Temperature Unit Setting

Operating Temperature Settings

Air Flow Level Settings

ECO Mode Setting

Operation

Selecting Temperature

General Operation Guide

Applications

Removing Paint

Specific application guide for paint removal using the heat gun.

Creating Bends

Soldering

Heat Shrinking

Maintenance and Service

Maintaining Tools