To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee HEAVY-DUTY SUPER HAWG 1680-20 and is the answer not in the manual?
Safety rules for maintaining a clean and safe work environment, avoiding hazardous atmospheres, and keeping bystanders away.
Precautions concerning plugs, cords, grounding, and exposure to wet conditions to prevent electric shock.
Guidelines for operator alertness, proper protective equipment, and preventing unintentional starting.
Rules covering tool handling, work area balance, appropriate attire, and dust collection.
Grounding requirements and procedures for tools with three-prong plugs and grounding systems.
Information regarding the use of double insulated tools with two-prong plugs.
Recommendations for selecting and using extension cords, including wire gauge and condition.
Step-by-step instructions for inserting and securing drill bits using the keyed chuck.
Guidance on choosing the correct bit for the job and maintaining bit sharpness.
Instructions for installing and using the auxiliary side handle for better control.
Procedure for adjusting the position of the rotating switch handle.
Detailed steps for safely removing the chuck assembly from the tool.
Explanation of the tool's clutch mechanism and its function in low speed.
How to react to and prevent bit binding, including immediate actions and bracing.
Techniques for safely bracing the tool during forward drilling operations.
Techniques for safely bracing the tool during reverse drilling operations.
Instructions on how and when to shift between speed settings safely.
Proper use of the reversing switch for bit removal and avoiding damage.
Basic operation of the trigger switch to start, stop, and control tool speed.
Safety precautions and procedures for performing drilling operations.
General guidelines for maintaining tool condition, inspection, and regular service.
Proper methods for cleaning the tool using mild soap and a damp cloth.
Information on returning damaged tools to a service center for repair.
General