Milwaukee M18 2606-20 User Manual

Cat. No. / No de cat.
2606-20, 2607-20
M18™ CORDLESS 1/2" DRILL/DRIVER AND HAMMER
DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION
DE M18™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Milwaukee M18 2606-20 Specifications

General

Voltage	18V
Speed	0-450/0-1, 800 RPM
Torque	500 in-lbs
Weight	3.7 lbs
Battery System	M18
Battery Type	Lithium-Ion
Chuck Type	1/2 inch

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, avoid explosive atmospheres, keep bystanders away for safe operation.

Electrical Safety

Match plugs to outlets, avoid contact with grounded surfaces, protect from rain/wet conditions.

Personal Safety

Stay alert, wear PPE, prevent unintentional starting, maintain proper footing and balance.

Power Tool Use and Care

Power Tool Use and Care

Battery Tool Use and Care

Service and Specific Safety Rules

Specific Safety Rules for Drill/Driver

Safety precautions for operations, noise, wiring, and using long drill bits.

Tool Description and Assembly

Assembly Procedures

Selecting Drill or Drive Action

Guide for choosing between drilling, driving, or hammer modes for specific tasks.

Operation Modes and Controls

Selecting Hammer, Drill or Drive Action (Cat. No. 2607-20)

How to select hammer, drill, or drive modes for model 2607-20.

Selecting Speed

Using the Control Switch

Starting, Stopping and Controlling Speed