To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 2627-20 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Motor Type | Brushless |
| Max Torque | 1, 200 in-lbs |
| Chuck Size | 1/2 inch |
| Weight | 5.6 lbs |
| Battery System | M18 |
| Battery Type | Lithium-Ion |
| Oscillations per Minute (OPM) | 10, 000 - 20, 000 |
| Length | 11.14 in |
| Tool Length | 7.75 inches |
Guidelines for maintaining a safe and clean work environment during operation.
Precautions to prevent electric shock and related hazards.
Recommendations for operator safety and protective measures.
Safety guidelines for workpiece securing, wiring checks, and tool stability.
Rules for bit selection, speed, startup, stopping, and handling hot bits.
Procedures for inserting and removing the battery pack from the tool.
Steps for safely installing and removing cutting bits, including collet usage.
Instructions on how to set and secure the depth guide for precise cuts.
How to turn the tool on and off, and basic operation steps.
Detailed steps for performing cuts, including plunge cuts and edge cuts.
Recommended practices for keeping the tool in good working order.
Guidelines for cleaning the tool, including proper agents and precautions.
Where and how to get the tool serviced or repaired.
