Milwaukee M18 FORCE LOGIC - Functional Description; Specifications

3
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
CABLE CUTTER
• Keep hands away from all cutting edges and
moving parts. Laceration and amputation can occur.
• To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool. Material may crack or shatter.
•
WARNING
To reduce the risk of arc ash,
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken rst.
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
• For best results, use only with energy absorbing
lanyards. Ropes, straps or chains may break and
cause failure. Do not use with lanyards at full tension.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
C
US
UL Listing for Canada and U.S.
WARNING
To reduce the risk of arc
ash, electric shock and
property damage, work on deenergized
lines when possible. Tool is not insulated.
Should work on energized lines be
required, ensure all proper precautions,
including those contained in NFPA 70E,
have been taken rst.
WARNING
Keep hands away from all
cutting edges and moving
parts. Laceration and amputation can
occur.
To reduce the risk of injury, wear safety
goggles or glasses with side shields when
operating or servicing the tool.
Read operator's manual.
FUNCTIONAL DESCRIPTION
1. Blade retainer
2. Blades
3. Front handle
4. Grounding lug
5. Trigger lock
9
7
5
2
3
8
1
6. LED
7. Trigger
8. Release trigger
9. Handle
10. ONE-KEY™ battery door
11. Hanger
11
6
10
4
SPECIFICATIONS
Cat. No. ..................................................... 2776-20
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
High Voltage Field Rating ........................... 34.5 kV
Max Capacity *
Single Conductor ................1500 MCM Cu, 15KV
1500 MCM Al, 46KV
3 Conductors .......................350 MCM Cu, 15 KV
3 Conductor Single Cable............3x500 MCM Cu
3x750 MCM Al
* Do Not Cut Steel
Replacement Blades ..............Cat. No. 49-16-2774