Milwaukee M18 FUEL 2880-20 - User Manual

Cat. No. / No de cat.
2880-20, 2881-20
M18 FUEL™ 4-1/2" / 5" BRAKING GRINDER
MEULEUSE À FREIN DE 115 mm / 125 mm (4-1/2" / 5") M18 FUEL™
ESMERILADORA CON FRENO DE 115 mm / 125 mm (4-1/2" / 5")
M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

GENERAL POWER TOOL SAFETY WARNINGS

WORK AREA SAFETY

Guidelines for maintaining a safe and organized workspace.

ELECTRICAL SAFETY

Precautions to prevent electric shock during tool use.

PERSONAL SAFETY

Advice on operator protection and safe practices.

POWER TOOL USE AND CARE

BATTERY TOOL USE AND CARE

SERVICE

SPECIFIC SAFETY RULES FOR GRINDERS

Key safety precautions when using grinding tools.

Kickback and Related Warnings

Explains kickback and how to prevent it.

Safety Warnings Specific for Grinding and Cutting-Off Operations

Safety Warnings Specific for Sanding Operations

Safety Warnings Specific for Wire Brushing Operations

Additional Safety Warnings

SYMBOLOGY

FUNCTIONAL DESCRIPTION

ASSEMBLY

Removing;Inserting the Battery

Steps for handling the tool's battery pack.

Removing;Installing;Adjusting the Type 27 Guard

Guide for guard installation and adjustment.

Grinding Wheel Selection

Care of Grinding & Cut-Off Wheels

Installing;Removing Grinding Wheels

OPERATION

Controlled Start

Feature description for smooth tool initiation.

Electric Brake

Explanation of the RAPIDSTOP™ braking system.

Paddle Switch Operation (2880-20)

Operating guide for the paddle switch model.

Slide Switch Operation (2881-20)

Operating guide for the slide switch model.

General Operation

Basic steps for using the tool effectively.

Using Grinding Wheels

Using Cut-Off Wheels

Using Wire Brushes

Cross Sanding

Removing Welds or Hammer Marks

Finishing Metal

Troubleshooting

MAINTENANCE

SERVICE - UNITED STATES

SERVICE - CANADA

LIMITED WARRANTY

Milwaukee M18 FUEL 2880-20 Specifications