To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 2680-20 and is the answer not in the manual?
Covers work area, electrical, and personal safety precautions for tool operation.
Guidelines for proper power tool and battery tool operation, maintenance, and charging.
Procedures for tool maintenance, repair, and battery pack servicing by qualified personnel.
Safety rules for grinders including intended use, accessory compatibility, and mounting.
Warnings and techniques to prevent kickback during grinder operation.
Safety for grinding wheels, guards, cut-off operations, pressure, and body positioning.
Precautions for using sanding discs and wire brushes, including guards and bristle hazards.
Includes respiratory protection, common sense, maintaining labels, and chemical exposure risks.
Details on model number, voltage, battery type, charger, speed, capacity, and operating temperature.
Steps for battery insertion/removal, and guard installation/adjustment.
Guidance on choosing and using sanding discs, including types and applications.
Instructions for controlled start, paddle switch, general operation, and using grinding wheels.
Techniques and safety for using cut-off wheels and wire brushes.
Common issues like scratches, discoloration, and their causes and solutions.
Procedures for tool maintenance, cleaning, and repairs.
Information on recommended accessories and where to find a complete listing.
Contact details for US and Canadian service centers and technical support.
Details of the limited warranty policy for Milwaukee power tools in USA and Canada.
Covers work area, electrical, and personal safety precautions for tool operation.
Guidelines for proper power tool and battery tool operation, maintenance, and charging.
Procedures for tool maintenance, repair, and battery pack servicing by qualified personnel.
Safety rules for grinders including intended use, accessory compatibility, and mounting.
Warnings and techniques to prevent kickback during grinder operation.
Safety for grinding wheels, guards, cut-off operations, pressure, and body positioning.
Precautions for using sanding discs and wire brushes, including guards and bristle hazards.
Includes respiratory protection, common sense, maintaining labels, and chemical exposure risks.
Details on model number, voltage, battery type, charger, speed, capacity, and operating temperature.
Steps for battery insertion/removal, and guard installation/adjustment.
Guidance on choosing and using sanding discs, including types and applications.
Instructions for controlled start, paddle switch, general operation, and using grinding wheels.
Techniques and safety for using cut-off wheels and wire brushes.
Common issues like scratches, discoloration, and their causes and solutions.
Procedures for tool maintenance, cleaning, and repairs.
Information on recommended accessories and where to find a complete listing.
Contact details for US and Canadian service centers and technical support.
Details of the limited warranty policy for Milwaukee power tools in USA and Canada.
General| Voltage | 18V |
|---|---|
| Wheel Diameter | 4-1/2 inches |
| No Load Speed | 10, 000 RPM |
| Tool-Free Guard | Yes |
| Spindle Thread | 5/8"-11 |
| Battery Compatibility | M18 |
| Switch Type | Slide |
