Milwaukee M18 FUEL 2785-20 - User Manual

Cat. No. / No de cat.
2785-20
M18™ FUEL™ 7" / 9" LARGE ANGLE GRINDER
MEULEUSE D’ANGLE GRANDE DE 180 mm / 230 mm (7" / 9")
M18™ FUEL™
RECTIFICADORA ANGULAR GRANDE DE 180 mm / 230 mm
(7" / 9") DE M18™ FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well-lit, and free from flammable materials to prevent accidents.

Electrical Safety

Follow precautions for plugs, cords, and grounding to prevent electric shock.

Personal Safety

Stay alert, use personal protective equipment, and prevent unintentional starting.

Power Tool Use and Care

Battery Tool Use and Care

Proper charging, handling, and storage of battery packs to prevent hazards.

Specific Safety Rules for Grinders

Common Grinding Operation Safety

General safety rules for grinding, sanding, wire brushing, and cutting-off operations.

Specifications and Assembly

Specifications

Technical details of the power tool, including model, RPM, and voltage.

Removing;Inserting the Battery

Instructions for safely installing and removing the battery pack from the tool.

Installing;Removing;Adjusting the Guard

Guide to properly attach, adjust, or remove the tool's protective guard.

Operation and Accessory Use

Grinding Wheel and Sanding Disc Selection

Guidance on choosing correct grinding wheels and sanding discs for specific tasks.

General Operation

Basic operating procedures, including controlled start and testing accessories.

Using Grinding Wheels

Techniques for using grinding wheels, including angles and pressure application.

Installing Side Handle

Instructions for attaching the side handle for improved tool control and safety.

Specific Operation Guidelines

Using Cut-Off Wheels

Guidelines for using cut-off wheels for specific cutting and notching operations.

Using Wire Brushes

Instructions for using wire brushes for rust, scale, and weld removal.

Using Sanding Discs

Techniques for sanding with discs, including angle, pressure, and stroke patterns.

Troubleshooting, Service, and Warranty

Troubleshooting

Common issues and their potential causes and solutions for the power tool.

Accessories

Information on recommended accessories and where to obtain them.

Service and Warranty

Contact information for service and details of the limited warranty in USA & Canada.

Milwaukee M18 FUEL 2785-20 Specifications