Mima kobi - Seat

12
CARE AND MAINTENANCE
• Tokeepkobiinperfectcondion,pleasegothrough
thefollowingstepsregularly.
• Fabricsandplascsconformtothehighestgradeof
colourfastness.Butexcessiveexposuretothesuncan
causeprematurefadingofplascsandfabrics.
CHASSIS CLEANING
Wash o sand and salt aer vising the beach.
Brush o excessive dirt. Then wipe clean with a moist
cloth and a mild cleaning agent.
LUBRICATING MOVING PARTS
Periodically lubricate the wheels, hinges and other sliding
parts using a light oil or silicon spray. Do not use heavy
oil as this will aract dust and grit which tend to clog and
damage moving parts.
SEAT CLEANING
The rigid seat can be wiped clean with a moist cloth and a
mild cleaning agent. More resistent marks can be rubbed
away using a pencil eraser.
The seat cushion and shoulder pads can be removed (see
g. 19) and must be washed by hand.
Please note the following:
- maximum temperature 30°C / 85°F
- do not bleach
- do not tumble dry
- do not iron
- do not dry clean.
CHECK OTHER PARTS
From me to me check kobi for loose screws, worn
parts, torn material and loose stching.
Contact your retailer if parts need to be replaced or repair
the parts as needed.