Mima moon - Assembling Seat Cover and Harness; Positioning the High Chair Seat; Positioning the Tray; Seat Height Adjustment

8
6. Assembling the seat cover and the safety harness
• WARNING: Whenever your child is in the seat,
make sure that the safety harness is nice and snug.
Place the seat cover on the highchair.
The shoulder straps can be posioned at two dierent
heights. Choose whichever posion is closest to the
upper part of the child’s shoulders. Pull each one through
the corresponding slot in the cover and the seat unl they
click into place.
7. Posioning the high chair
Reposion the high chair seat making sure that the pin in
the top part goes into the slot of the junior seat and press
downwards unl it clicks into place.
8. Posioning the tray
Align the slots underneath the tray with the safety bar.
Press down with your hands in the center of the tray unl
it ts into place and you hear a “click”.
9. Seat height adjustment
Press the buon on the base of moon with your foot and
the seat will rise automacally. You may need to press
the chair down slightly to acvate the rising mechanism.
Press the buon on the base of moon with your foot and
at the same me push the seat downwards to lower it.
Lowering the seat is easier if you push down on the upper
middle part of it. Raise your foot when the seat is at the
desired height.
6
7
8
9
“click”
“click”
“click”