Need help?Do you have a question about the MIMAKI CG-130SRII and is the answer not in the manual?
General| Repeatability | ±0.1 mm |
|---|---|
| Operating Temperature | 5 - 35 °C |
| Weight | 80 kg |
| Max. Media Width | 1370 mm |
| Max. Cutting Width | 1300 mm |
| Cutting Area | 1, 300 mm x 50 m |
| Cutting Speed | 1000 mm/s |
| Media Thickness | 0.1 - 0.5 mm |
| Media Type | Vinyl, Paper, etc. |
| Interface | USB2.0 |
| Power Supply | AC 100 - 240 V |
| Operating Humidity | 35 - 80 % |
| Max Cutting Force | 500 gf |
| Mechanical Resolution | 0.025 mm |
| Power Consumption | 120W |
Covers warranty, FCC compliance, and interference information.
Introduces the manual, media, and key plotter functionalities.
Explains pictorial signs, warnings, and specific operational safety measures.
Guide on understanding manual conventions, keys, and display elements.
Specifies required dimensions for machine placement and operation.
Identifies and describes key components on the front of the plotter.
Details the plotter's control panel, keys, and display functions.
Covers cable connections (USB, RS-232C, Power) and plotter operational modes.
Guide to installing cutters, pens, and adjusting blades for operation.
Explains different tool condition types and how to set them for cutting, plotting, or pouncing.
Instructions for loading and detecting both leaf (cut) and roll sheets.
Procedures for test cutting, setting origin, and performing actual cutting operations.
Navigating and using the plotter's jog mode for various settings.
Adjusting settings to compensate for differences in sheet thickness and roller wear.
Explains multiple cuttings, division cuts, sorting, and perforated lines.
Detailed guide for using registration marks for accurate cutting of printed designs.
Table of common phenomena, their causes, and remedies for troubleshooting.
Explains specific error codes, their causes, and recommended solutions.
Describes status messages and required user actions during operation.
Detailed technical specifications for the plotter models.
Instructions for replacing and adjusting the cutter blade.
Visual diagrams illustrating the operation of various plotter functions and key presses.
To Next Page
