2-5
Installing a tool
2
Basic Operations
How to install the cutter holder
1
Rotate the knob to loosen the holder
presser.
holder
2
Insert the cutter holder into the tool
holder.
• Push the brim of the cutter holder against the tool
holder.
• Press the brim of the cutter holder with the l holder
presser.
3
Fix the cutter holder.
• Turn the knob of the tool holder clockwise, and surely
fix it.
• Install the cutter holder to the tool holder of the carriage.Be sure to insert the cutter holder all
the way in the tool holder.
• Fix the cutter holder firmly. If not, accurate and high-quality cutting (plotting) will not be
achieved.
To Next Page
Loading...
