Mimaki Europe B.V.
Sign Graphics Products
• NRS (Nozzle Recovery System)
Continuous Operation
29
• 10 nozzles can be registered per 1 nozzle line
• NRS is not changing the printing speed
• NRS is not working when:
• Printing in low pass modes
• Printing in some modes with MAPS3
• The position of the nozzle is not correct
Register the number
of missing nozzles
Replacing the clogged nozzle, by
using a other working nozzle
Nozzle check pattern
Clogged/Missing
nozzles
To Next Page
Loading...
