Need help?Do you have a question about the MIMAKI CJV330 Series and is the answer not in the manual?
Precautions for safe use, including handling abnormal conditions and contact with liquids.
Important warnings and notices regarding the safe connection and use of the power supply cable.
Safety advice to keep body parts and clothing away from moving machine components.
Warning against attempting to disassemble or repair the machine due to risks of failure, shock, or fire.
Safety instructions for handling the cutter blade and holder to prevent injury or damage.
Caution regarding the extremely hot heater and condensation formation on the print head.
General safety advice, including keeping children away and not pulling media when clamped.
Recommended space around the machine for safe and proper replacement of ink and media.
Identifies and describes the main parts of the printer, including the front and rear views.
Step-by-step instructions for safely connecting the power cable to the machine and outlet.
Guidance on connecting the machine to a PC using LAN or USB cables.
Overview of the system configuration, including RIP software and PC connection.
Instructions for downloading and installing the necessary Mimaki driver software.
Procedure for installing MIMAKI RIP software (RasterLink) for printing operations.
Steps to select and download color profiles for consistent print quality based on media and ink.
Detailed instructions for setting up MIMAKI RIP software, including printer registration.
Procedures for replacing ink when 'Ink Near End' or 'Ink End' messages appear.
Overview of the steps involved in the printing process, from power on to media loading.
Guidance on adjusting the print head height based on media thickness for optimal print quality.
Instructions for adjusting pinch roller positions to suit media width and ensure proper feeding.
Detailed procedure for loading roll and leaf media, including handling precautions.
Step-by-step guide for the cutting process, from power on to test cutting.
Introduction to the XY slitter and its components.
Essential safety precautions and recommendations for periodic machine maintenance.
Table outlining maintenance items, timing, and related procedures.
Information on consumable items and their replacement timing based on usage.
General troubleshooting guide for common issues like power, printing, and media problems.
List of messages, their causes, and corrective actions for various errors.
Table of error numbers, messages, causes, and corrective actions for system errors.
Action to take if a SYSTEM HALT number is displayed: turn power off and on.
To Next Page
General