MIMAKI CJV330 Series - Cutter Replacement (XY Slitter)

Chapter 7 Maintenance
211
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
X Cutter Replacement (XY Slitter)
Replace cutters when blades are chipped or blunt.
• TS: Feature not included.
• Avoid touching the cutter blade when replacing cutters. Failure to do so may result in injury. Use
radio pliers or tweezers to replace cutters.
• Avoid storing this product in locations accessible to children.
1
Slide the X cutter unit to the left-hand end to remove.
2
Turn the screw and remove the cutter.
• When disposing of the product, contact an industrial waste disposal operator or dispose of
the product in accordance with the local laws and regulations.
7