MIMAKI fine Cut 3 User Manual

MIMAKI ENGINEERING CO., LTD.
http://www.mimaki.co.jp/
E-mail:traiding@mimaki.co.jp
OPERATION MANUAL
D200674

MIMAKI fine Cut 3 Specifications

General

Model	fine Cut 3
Maximum Cutting Length	25000 mm
Mechanical Resolution	0.025 mm
Software Resolution	0.025 mm
Interface	USB
Compatible OS	Windows
Power Requirements	100 - 240 VAC, 50/60 Hz
Power Supply	100 - 240 VAC, 50/60 Hz
Operating Humidity	35 - 65 % RH

Summary

About FineCut for CorelDRAW

System Requirements

About This Manual

Notations

Describes how menu items and buttons are displayed in the manual.

Symbols

Explains the meaning of icons used throughout the manual.

FineCut Menu

Quick Start

Advanced Operations

Enlarge and Reduce an Object

Instructions on scaling objects with aspect ratio or independently.

Cut an Object Multiple Times (Copy)

Cut an Object by Layer

Cut an Object by Color

Identify the stroke width and overlap

Set Cut Conditions for Each Media

Make a Seal

Attach a Contour

Function to automatically generate outlines around an object for cutting.

Create a Registration Mark

Recognize and cut Registration Mark (in use of CG-EX series)

Recognize and cut Registration Mark (in use of CG-FX series)

Fill and Outline of an Object

Plotter/User Setup

Plot Dialog

Troubleshooting

Layout Area Display Issues

Addresses problems with the layout area appearing thinner than normal.

Cannot Change Sheet Size

Explains issues with sheet size not updating correctly with MGL-IIc commands.

FineCut Function Activation Issues

VBA Settings for CorelDRAW 10