32
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Fill and Outline of an Object
In the figure below, the fill of the ellipse is set and outline are made thicker.
Cutting is performed not by the outline but the fill.
In case an object is not filled with a color, the outline is cut.
In this case, outline is cut regardless of the thickness.
Check it when selecting the object or on the CorelDRAW Wire flame mode.
Cut this
Cut this
To Next Page
Loading...
