MIMAKI fine Cut 3 - Set Cut Conditions for Each Media

15
○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Set Cut Conditions for Each Media
This function is effective only for the MGL-IIc commands.
FineCut enables to register the plotter cut conditions.
Before plotting, change the cut conditions depending on the media type.
1 Click Media Setup button (see page 33) on the [Plotter/
User Setup] menu to display the Media/Tool Setup dialog
appears.
(Alternatively, click Edit button (see page 39) in the Plot dialog.)
Edit the media setting.