MIMAKI fine Cut 3 - Make a Seal; Attach a Contour

19
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Make a Seal
The following example shows how to cut the contour of a printed pattern to make a
seal or sticker.
FineCut provides you the Contour Extraction function that enables to generate out-
lines on an object and the Registration Mark Recognition function that enables to per-
form axial correction and distance correction at once using Mimaki CG-EX series and
Mimaki CG-FX series cutting plotter with a mark sensor.
If the entered values differ from the settings on the plotter, the object will not
be output correctly.
Attach a Contour
This function enables to make outlines automatically .
1 Select the object to attach a contour.