MIMAKI fine Cut 3 - Plot Dialog

35
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Plot Dialog
The following describes the Plot dialog.
(1)Layout Area
The white portion is the effective cutting area loaded from the sheet. In this area, the
sheet width is displayed along the horizontal axis and the sheet length along the verti-
cal axis. The cutting area displays a colored object which was created by CorelDRAW.
White object is displayed as the hatched pattern to recognize it easily. With a LCD or
a monitor screen with low contrast, it may not be easy to recognize the hatched pattern.
Enable to move the object by dragging it with the
mouse.
If the object overflows from the cutting area, the
mark appears to the left of Plot button.
Click the
mark to display the error detail.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)