MIMAKI fine Cut 3 - Create a Registration Mark

21
○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Create a Registration Mark
1 Point the position to create a registration mark.
Enclose the object with the rectangle tool.
2 Click [Create Registration Mark] button.
Select Mark type and Mark length and click Create button.
When cutting register
marks continuosly, set
the register mark size to
8 mm.