○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
33
Plotter/User Setup
Set the communication conditions to enable communication between FineCut and the
plotter.
If the entry value differs from the setting on the plotter, object is not output
normally.
Click [Plotter/User Setup] button in the FineCut menu.
• Plotter
Select the plotter model connected, the command set by the plotter, and the step
size.
Click Media Setup button to display the media setup screen. (see page 15)
• Communication
Select the communication conditions set by the plotter connected.
• Plot Dialog
Default Sheet Size : When FineCut displays the Plot dialog, it loads
the sheet size from the plotter. If this load op-
eration is not performed normally, the preview
size refers to the default sheet size set on this
dialog.
To Next Page
Loading...
