31
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3 Set the registration mark to recognize continuously.
4 Click Plot button to start plotting.
5 The following message appears on the “CG-FX series”
plotter panel after cutting the first sheet.
6 Set the next sheet. Detects the registration mark auto-
matically to perform cutting.
Select “Leaf sheet” (right) icon.
Set the continuous numbers.
(numbers of repeating sheets.)
Select the first detect points of the registration mark.
Select the second and the subsequent detect points of
the registration mark.
CHANGE SHEET
To Next Page
Loading...
