Need help?Do you have a question about the MIMAKI JV100 and is the answer not in the manual?
General| Print Technology | Piezo inkjet |
|---|---|
| Ink Type | Solvent |
| Ink Colors | CMYK |
| Media Types | banner, film, paper, canvas |
| Connectivity | USB, Ethernet |
| Power Supply | AC 100-240V, 50/60Hz |
Details liability limitations for product use, materials, and unauthorized modifications.
Explains symbols used for warnings, cautions, notices, and important information.
Critical safety and procedural guidelines before undertaking any maintenance activities.
Outlines the schedule and procedures for various machine cleaning and maintenance tasks.
Procedures for shaking ink cartridges to ensure consistent print quality.
Step-by-step guide to clean the printer's wiper for optimal performance.
Instructions for cleaning the cap rubber to prevent print head issues.
How to clean the NCU sensor for accurate nozzle check function.
Cleaning the carriage underside to prevent ink transfer to media.
Procedure for cleaning the DAS sensor to ensure accurate print position correction.
Routine cleaning to prevent clogging in the ink discharge channel.
Cleaning the media sensors to guarantee correct media detection.
Guide on cleaning the media holder for proper media handling.
Instructions for cleaning the platen to ensure smooth media feeding.
How to clean the external parts of the printer.
Procedures for maintenance when the printer is idle for an extended period.
Steps to replace the wiper when prompted by the system.
Procedure for replacing the wiper cleaner, recommended annually.
Instructions for replacing the printer's cap to resolve print quality issues.
Guide on replacing the cap absorber to prevent ink spills.
How to replace the blowing fan filter if it becomes dirty.
Procedure for replacing worn or dirty pinch rollers.
Steps to replace a deformed media holder.
Instructions for replacing the media cutter blade when blunt.
Procedure for replacing the waste ink tank when it is full.
To Next Page