Need help?Do you have a question about the MIMAKI JV150-130 and is the answer not in the manual?
General| Print Technology | Piezo inkjet |
|---|---|
| Maximum Print Width | 1, 371 mm (54") |
| Print Resolution | Up to 1440 x 1440 dpi |
| Resolution | Up to 1440 x 1440 dpi |
| Ink Type | Eco-solvent ink |
| Ink Colors | Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta |
| Printhead | Mimaki printhead |
| Media Types | Vinyl, banner, paper |
| Media Width | Up to 1, 370 mm |
| Connectivity | USB, Ethernet |
| Power Requirements | AC 100-240V, 50/60Hz |
Instructions for moving the printer on a step-free floor.
Requirements for securing installation space before assembling the printer.
Specifies the optimal operating environment temperature for reliable printing.
Identifies and describes the main components of the printer's front side.
Identifies and describes the components on the rear and right sides of the printer.
Details the function of the operation panel, including keys, display, and status indicators.
Instructions for connecting the printer to a PC and power source using appropriate cables.
Step-by-step instructions for inserting ink cartridges into the machine.
Important precautions for safely handling and using ink cartridges.
Overview of media specifications and handling guidelines for the printer.
Explains the different modes (NOT-READY, LOCAL, MENU, REMOTE) and their functions.
Provides a general overview of the basic operational steps for the printer.
Detailed instructions for correctly powering the printer on and off, including safety precautions.
Guides on how to properly set roll or leaf media into the printer.
Instructions for adjusting the print head height based on media thickness for optimal printing.
Detailed steps for loading a roll of media onto the printer's hanger and rollers.
Steps to change the print origin position for accurate printing placement.
How to adjust the temperature settings for the pre-heater, print heater, and post-heater.
Instructions for printing test patterns to check for nozzle clogging and print quality.
Instructions for performing head cleaning based on test print results to resolve print quality issues.
How to adjust media feed amount to correct stripes and improve print quality.
Procedures for sending print data, starting, stopping, and managing print jobs.
Introduction to the SETUP MENU and its purpose for setting print conditions.
Guide to registering and selecting optimal print conditions (SETUP 1-4) for different media.
Adjusts media feed, ink drop positions, heaters, drying time, margins, vacuum, and feed speed.
Configures automatic cleaning, interval wiping, and ink filling to maintain print heads.
Introduction to common machine settings for easier operation.
Configures network connectivity and email notifications for printer events.
Resets various settings (SETUP, MAINTENANCE, MACHINE SETUP) to their factory defaults.
Configures nozzle check frequency, recovery, and judgment conditions.
Overview and display of machine status and usage data from the INFORMATION MENU.
Essential safety precautions to follow before and during machine maintenance.
Instructions for cleaning exterior surfaces, platen, media sensor, and media press.
Procedures for maintaining the ink cap and wiper in the capping station.
Detailed instructions for washing head nozzles and ink discharge passage.
Procedures for preparing the machine for long-term storage to prevent issues.
Careful instructions for cleaning the ink head and surrounding areas to maintain precision.
Using nozzle recovery and configuring automatic maintenance tasks like refreshing and cleaning.
Guides for replacing consumables like the wiper and waste ink tank.
Instructions for replacing the consumable cutter blade when it becomes dull.
General advice for diagnosing and resolving issues before contacting service.
Steps to diagnose why the printer is not powering on, checking cable connections.
Identifies causes for printing not starting, like data transmission or media issues.
Addresses issues related to media jamming or soiling due to unsuitable media or improper settings.
Diagnoses why the heater temperature is not reaching the set level.
Provides corrective actions for various image quality problems like lines, blurs, or double printing.
Solutions for nozzle clogging when head cleaning alone is insufficient.
Explains what to do when the ink cartridge LED is red and a warning message appears.
General section on interpreting warning and error messages displayed on the LCD.
Details various ink-related error messages, their causes, and remedies.
Lists specific error codes, their causes (often hardware related), and recommended solutions.
Explains SYSTEM HALT errors, their causes (e.g., Wiper org, message), and solutions.
Contains technical specifications for the JV150-130 and JV150-160 models.
Details on ink types, colors, capacity, shelf life, and storage requirements.
Illustrates the correct order for installing ink cartridges in the ink station.
A form to fill out for reporting troubles or abnormal functions to the sales office.
To Next Page
