MIMAKI JV150-130 - Specifications

Chapter6 Appendix
6-2
Specifications
Machine specifications
Item JV150-130 JV150-160
Print head
Method Drop-on-demand piezoelectric print heads
Specification 1 head staggered
Printing mode (scan x feed) 360×360dpi/ 540×360dpi/ 540×720dpi/ 720×1080dpi/ 720×1440dpi/ 1440x1440dpi
Usable inks
Sublimation dye ink (Sb) : 6 colors (Y,M,Bl,K or Dk,LBl,Lm)
Solvent ink (SS) : 8 colors (Y,M,C,K, Lc,Lm, Or, Lk)
Solvent ink (ES) : 6 colors (M, C, Y, K, Lm, Lc)
Ink supply
Supplying from ink cartridges through tubes.
Ink cartridge replacement type :
Supplying by Toggle switch over with 2 cartridges/color (4-colors ink set)
Capacity of ink cartridge Y,M,C,K, Lc,Lm, Lk, Bl, LBl, Dk : 440cc cartridge
Usable media Tarpaulin/ FF(Flexible Face)/ Weatherproof PVC
Max. printing width 1361mm 1610mm
Roll Media size
Maximum 1371mm 1620mm
Minimum 210mm
Thickness 1.0mm or less 1.0mm or less
Roll outside
diameter
*1
Paper media : Φ250mm or less
Other media : Φ210mm or less
Roll weight
*1, *2
40kg or less
Roll inside diameter 2 or 3 inches
Printing surface Side facing outward
Roll end treatment
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Leaf media size
Maximum 1371mm 1620mm
Minimum 210mm
Margin
Leaf media Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Roll media Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Distance accu-
racy
Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reproducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m
Head height adjustment
Select for manual 3-stage (2.0/2.5/3.0) + 1 mm or + 2 mm at installation. Base
height can be raised.
Cutting of media Cutting of Y direction by the head cutter. Cutting accuracy (steps) : 0.5 mm or less.
Media delivery
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Waste ink tank Bottle type ( 2,000 cc)
Interface USB 2.0 (Ethernet 10 BASE/ 100 BASE E-mail function)
Command MRL- IV
Noise
during standby Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m)
during continuous
printing
*3
Less than 65 dB (A)
during discontinu-
ous printing
Less than 70 dB (A)
Safety Standard
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Direc-
tive,Machinery Directive, RoHS Directive), CB Report, RoHS
Power AC100 - 120V/ 220 - 240V ±10% 50/60Hz ± 1Hz
Power consumption 1440W or less (AC 100 - 120V)