Chapter 4 Maintenance
4-17
1
2
2
4
5
6
8
Replace the waste ink tank.
(1) Prepare a new waste ink tank (SPC-0117).
(2) Insert the waste ink tank by holding a handle
of the tank.
9
Close the waste ink tank stopper.
10
Press the key.
• The ink discharging amount that is controlled by
the machine is reset and the message is
cancelled.
Replacing the waste ink tank before the waste
ink tank confirmation message is displayed
if you replace the waste ink tank before the waste ink tank
confirmation message is displayed (before the 2L tank is
80% (1.6L) full), set the waste ink information to 0% in the
Information menu.
1
Perform steps 6 through 9 in "Replace the
waste ink tank with another" ( P.4-16) to
empty the waste ink tank.
2
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
3
Press 4 times, and press the Press
the key.
• “INK TANK EXGHANGE” will be selected.
4
Waste ink tank information is displayed.
5
Press the
(v)
.
• The reset screen for the waste ink tank amount
will be displayed.
6
Press the key.
• The waste ink tank amount that is managed in this
machine will be reset.
• Waste ink is equivalent to waste oil of industrial
waste. Request an industrial waste disposal
company for disposal of waste ink.
To Next Page
Loading...
