Front cover
Open the cover in setting of medias, taking of
measures against jamming of medias or in
maintenance inside the station.
Even when the power switch is off, keep this cover
and the other covers closed.
Operation panel
This panel has the operation keys
required for operating the machine and
the LCDs for displaying setting items,
etc.
Clamp lever (front)
Moves the pinch rollers up and down to hold or
release the media.
Waste ink tank
Waste ink gathers in this tank.
Stand
Supports the main body of the machine. It is
provided with casters that are used to move
this machine.
Maintenance cover (upper)
Open the cover in maintenance.
Even when the power switch is off, keep all covers
Platen
The printed media is sent out, sliding on the
platen.
Ink cartridges
Each cartridge contains an ink of a particular
color.
Cartridge protection cover
This prevents an injury or breakage of the
machine due to a protrusion of the ink
cartridge.
(It is located under the ink cartridge.)
Take-up device
Automatically winds up the roll media printed.
Carriage
Move the print head unit from side to side.
Maintenance cover (lower)
Open the cover in maintenance.
Even when the power switch is off, keep all covers
closed.
CleaningSolutionCartridge slot
Insert the cleaning solution cartridge.
To Next Page
Loading...
