Need help?Do you have a question about the MIMAKI JV150-160 and is the answer not in the manual?
General| Print Technology | Piezo inkjet |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Operating Humidity | 35 - 65 % RH (Non-condensing) |
| Ink Type | Eco-solvent Ink |
| Ink Colors | CMYK |
| Ink Capacity | 1 L |
| Media Type | banner |
| Media Width | 1600 mm (63 inches) |
| Maximum Media Thickness | 1.0 mm |
| Connectivity | USB2.0 / Ethernet |
| Power Supply | AC 100-240V |
| Operating Temperature | 20°C to 30°C |
Explains symbols used for safety and warnings.
Provides critical safety guidelines for machine operation.
Details precautions for safe and proper machine installation.
Describes safety mechanism that terminates operation when covers are open.
Explains the location and importance of warning labels on the machine.
Provides step-by-step instructions for safely moving the printer.
Identifies and describes the main parts and their functions.
Explains the controls and display for operating the machine.
Details how to connect the printer to a PC via USB and power.
Guides users on how to properly insert ink cartridges.
Describes the different operating modes of the machine.
Outlines the essential steps for basic machine operation.
Details the correct procedure for powering the machine on and off.
Explains how to prepare and load media for printing.
Provides instructions for setting roll media onto the machine.
Describes how to print test patterns to check print quality.
Explains how to perform head cleaning to resolve print quality issues.
Covers the process of sending and starting print jobs.
Introduces the menu for setting print conditions.
Guides on saving and recalling custom print settings.
Details how to correct media feed for accurate printing.
Explains how to configure heater temperatures for optimal printing.
Describes settings that affect print head movement.
Allows configuration of automatic cleaning cycles.
Provides a reference table for machine setup options.
Configures the automatic power-off function for energy saving.
Controls whether media remaining amount is displayed.
Sets whether media feed is confirmed before printing.
Configures email notifications for machine events.
Resets machine settings to factory defaults.
Lists important safety and care instructions before performing maintenance.
Details maintenance procedures for the capping station components.
Explains how to wash the head nozzles for optimal performance.
Provides procedures for preparing the machine for extended periods of non-use.
Describes how to use alternative nozzles when some are faulty.
Allows configuration of automated maintenance tasks.
Guides on replacing consumable parts like the wiper.
Provides steps for replacing the waste ink tank.
Offers initial steps to resolve common machine issues.
Lists remedies for various print quality problems.
Explains how to handle ink cartridge errors and warnings.
Lists messages and their corresponding causes and solutions.
Details specific error messages related to ink cartridges.
Covers various system error messages and their resolutions.
Lists the technical specifications of the printer models.
Details the specifications and requirements for the inks used.
Shows the correct order for installing ink cartridges.
Provides a form for reporting machine issues or inquiries.
To Next Page
