MIMAKI JV150-160 - Setting the Cleaning Intervals and Type; Fill up Ink

4-14
Chapter 4 Maintenance
Setting the Cleaning Intervals and
Type
This is a function operated instead of the PUMP tube
washing when the cleaning solution for maintenance has
been used up.
The cleaning type and the interval between each cleaning
operation are set.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press twice, and press the
key.
• “AUTO MAINTENANCE” will be selected.
3
Press the several times to select
“Interval” or “Type”, and press the
key.
4
Press to select a set value, and
press the key.
• Set value : The set value will differ according to
the ink type being used.
• Set value of type : SOFT/ NORMAL/ HARD
5
Press the key several times
to endthe setting.
Fill up Ink
Supplies ink to correct nozzle clogging.
1
Press the
(MENU)
key in LOCAL.
• MAINTENANCE MENU will be displayed.
2
Press times, and press the
key.
• “FILL UP INK” will be selected.
3
Press to select the filling type.
• Soft : Use this in cases where head cleaning
will not achieve recovery, such as when
multiple clogged nozzles occur or
nozzle cluster dropout occurs.
• Normal : Use this if nozzle cluster dropout occurs
in initial ink filling.
• Hard : Use this in cases where the dumper has
become empty, such as in dumper
replacement.
4
Press the key.
• If you selected “Soft” in step 4, a Select Fill Up
Color screen will be displayed.
If you selected “Normal” or “Hard”, go to step 6.
5
Press to select the filling color,
and press the key.
6
Press the key.
• Ink is supplied automatically.
7
Press the key several times
to end the setting.
When 600cc cartridge is used
 Even when [Ink Level] is displayed, enough ink for
head cleaning may remain in the ink pack.
When [Ink Level] appears, see P.3-15 “When [Ink
Level low] is displayed” and enter the current weight of
the 600cc cartridge.
 When the remaining ink is not enough for head
cleaning
When the remaining ink is not enough for head
cleaning, an error message “ Error” shown on the step
3. Replace with a new ink pack, and perform head
cleaning again.