1
Inkjet printer JV150-130/160 BS INK MODEL
Requests for Care and Maintenance
This machine is a precision machine equipped with extremely fine mechanisms. Especially, the nozzle sur-
face of the heads from which the ink is discharged is affected even by a slightest attachment of dust or paper
powder and the proper printing results could not be obtained. With a view to using this machine in a better
condition, we would like to recommend performing the following care and maintenance on daily basis.
1. When to care
When to care What to care Reference Page
When the Machine Is Not Used
for a Long Time
Perform “Storage Wash” P.3
Once a day
(at the end of the daily work)
Surroundings of the heads P.4
Capping station P.5
Wiper P.6
Media press P.7
Media sensor P.7
Jam sensor P.7
Once a week
(at the end of the work on
weekend)
Cleaning the Platen P.8
Exterior P.8
Waste ink tank P.8
Ink Discharge Passage P.9
Once a month Ink Maintenance P.9
Replace or clean when it is dirty
Replacing the exhaust BOX filter or exhaust BOX. P.10
Replace the CP pad set. P.11
Cleaning or replace the pinch roller. P.12
Tools required for maintenance
• Cleaning stick (SPC-0527)
• Cleaning solution MS2/ES3/HS kit 200 (SPC-0369)
• Cotton swab
• Safety glasses
• Gloves
• Soft fabric
To Next Page
Need help?
General