
Do you have a question about the MIMAKI JV-300-130 and is the answer not in the manual?
Instructions for moving the machine safely and correctly.
Identifies and describes key components of the machine.
Explains the functions and display of the machine's control panel.
Details how to connect the PC using the USB interface cable.
Step-by-step guide on how to insert ink cartridges into the machine.
Detailed instructions for safely powering the machine on and off.
Guide on how to set roll and leaf media for printing.
Instructions for adjusting the print head height based on media thickness.
Step-by-step guide to load roll media onto the machine.
Procedure to adjust the print starting point on the media.
How to print test patterns to check nozzle status and print quality.
Steps for performing head cleaning to resolve nozzle issues.
Steps to initiate the printing process.
How to register optimal print conditions (SETUP 1-4) for different media.
Corrects media feed amount for accurate printing and to prevent stripes.
Corrects ink drop position for bidirectional printing issues.
Configures automatic head cleaning based on prints, length, or time.
Registers the weight of eco cases and cartridges for accurate ink quantity calculation.
Important safety and operational notes to follow during maintenance.
Procedure for washing the head nozzles to improve print quality.
Enables using alternative nozzles when some are missing or clogged.
Troubleshooting steps for when the machine fails to power up.
Steps to resolve issues preventing the machine from starting print jobs.
Solutions for media jamming or issues with soiled media.
Corrective actions for various image quality problems like stripes or blur.
Steps to resolve nozzle clogging issues not fixed by basic head cleaning.
Explains how to interpret and resolve ink cartridge trouble indicators.
Details various ink-related error messages and their remedies.
Lists specific error codes, their causes, and solutions.
Addresses system halt errors and their troubleshooting steps.