How to fix poor image quality on MIMAKI JV34-260?
To address poor image quality, try the following: * Execute the head cleaning function. * Maintain the inside of the station. * Execute the [MEDIA COMP.] function. * Remove any paper or dust attached to the head path, such as the media press.
How to prevent media from jamming or getting soiled in MIMAKI Printer?
To prevent media jams and soiling, use the recommended media, avoid media with curls or bent ends, and utilize a take-up device or reload the media.
What to do if ink cartridge warning appears on my MIMAKI Printer?
If an ink cartridge warning appears, replace the indicated ink cartridge immediately.
Why [HEAT] or [CONSTANT] LED does not light up on MIMAKI JV34-260 Printer?
If the [HEAT] or [CONSTANT] LED is not lit, ensure the machine is powered on.
General| Maximum Print Width | 2600 mm |
|---|---|
| Printing Technology | Piezo inkjet |
| Media Width | Up to 2600 mm |
| Print Width | 2600 mm |
| Ink Type | Solvent |
| Ink Type (Mimaki) | SS21 |
| Ink Colors | CMYK |
| Ink Colors (Extended) | 6 colors |
| Media Type | Vinyl, Banner, Paper |
| Media Thickness | Up to 2 mm |
| Connectivity | USB, Ethernet |
| Power Supply | AC 200-240V, 50/60Hz |
Critical warnings and precautions for safe operation and handling of the machine.
Guidelines for choosing a safe and suitable environment for machine installation.
Explains the operation panel functions and how to connect the printer.
Guides on installing ink cartridges and safely handling printing media.
Provides instructions for safely moving the printer.
Explains the display, lamps, and buttons on the printer's operation panel.
Describes the function and location of heaters and media sensors.
Step-by-step process for installing ink cartridges into the printer.
Details the procedures for powering the printer on and off, including precautions.
Guides on loading media, adjusting head height, and handling media correctly.
Detailed instructions for loading heavy-duty and narrow roll media onto the machine.
Step-by-step instructions to power on the printer and connected PC.
Step-by-step instructions to safely power off the printer.
Important cautions to observe when turning the printer off.
How to adjust the print head height based on media thickness for optimal printing.
Procedures for attaching the paper core and securing the heavy-duty roll media.
Steps to select the unit and load the heavy-duty roll media.
Instructions for positioning and securing media onto the roll shaft.
Process of feeding and temporarily securing the media using clamp levers.
Steps to adjust tension bars for proper media feeding and take-up.
Final steps to hold media and select the roll type for printing.
Steps for securing media on the take-up device and rolling it.
Step-by-step instructions for loading narrow roll media.
Procedures for inserting and locking the narrow roll media.
Steps to even the media and use the media press for secure loading.
Instructions for preparing the narrow take-up device and fixing the media.
Covers user types for print settings and media correction procedures.
Adjusting heater temperatures and configuring print methods like PASS and speed.
Detailed configuration options for various machine functions like fan, media handling, time, and naming.
How to print correction patterns and adjust media feed rate.
Steps to correct ink drop position for bidirectional printing when dot positions shift.
How to set and adjust the temperatures for the pre-, print-, and post-heaters.
A flowchart guiding the adjustment of heater temperatures for solvent ink based on media issues.
Outlines the process and defines the print area for double-sided printing.
Covers printing on the front side and configuring the double-sided printing mode.
Details printing on the back side and adjusting alignment for accurate double-sided output.
A guide to the sequence of operations for double-sided printing.
Steps for setting media, checking heaters, and printing the front side of the media.
Settings for print of back side, ink layers, and media detection in double-sided mode.
Guides on printing on the back side, including media preparation and alignment checks.
How to check and correct print misalignment for double-sided output.
Crucial safety guidelines and information on cleaning solutions before maintenance.
Methods for resolving severe nozzle clogging and supplying new ink.
Critical safety rules to follow during all maintenance activities.
Initial steps to resolve power and printing initiation problems.
Steps to fix problems where the printer does not turn on.
Steps to resolve issues preventing the printer from starting print jobs.
Detailed steps to resolve print head nozzle clogging.
To Next Page