3-22
Setting Cleaning during Printing
There are two cleaning types during printing.
CLEANING : Automatic head cleaning conducted during printing is set.
WIPING : Automatic wiping during printing is set.
Setting the CLEANING
It is set whether head cleaning is performed automatically during printing.
In cleaning during printing, a cleaning interval is set according to the length of a printed medium.
Printing is interrupted each time a medium is printed for the set length, and head cleaning is performed
automatically during the interval.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select one of the types (1 to 4) and press the key.
4
Press to select [Print.CLEANING].
5
Press the key twice.
6
Press to select ON.
• When selecting OFF, proceed to Step 9.
7
Press the key.
8
Press to set a cleaning interval
and a cleaning type and press the key.
Item selecting : by the keys
Interval and Type setting : by the keys
9
Press the key several times to end the setting.
• This function does not operate when ink near-end occurs. See P.1-12 “Changing an ink cartridge” to
solve the ink near-end.
• Depending on the state of the heads, etc., the image quality deterioration may not be improved even
with this function performed.In this case, contact our service office or the distributor in your region.
To Next Page
Loading...
