MIMAKI JV34-260 - Setting a Scanning Direction

3-14
Setting a Scanning Direction
1
Perform the operations in P.3-12 Steps 1 to 5.
2
Press to select [SCAN DIRECTION].
3
Press the key.
4
Press to select a scanning direction.
• Set value : HOST / Uni-D / Bi-D
5
Press the key.
6
Press the key several times to end the setting.
[1]PRINT MODE
PASS <en t >
[1]PRINT MODE
SCAN D I RECT I ON <e n t >
[1]PRINT MODE
ScanDIRECT ION :
HOST
[1]PRINT MODE
ScanDIRECT ION :
B i-D
[1]PRINT MODE
SCAN D I RECT I ON <e n t >