MIMAKI JV34-260 - Setting Logical Seek

Setting the Printing Method
3-15
1
1
3
Convenient use
5
6
Setting Logical Seek
The motion of Head varies depending on the set of Logical-seek.
1
Perform the operations in P.3-12 Steps 1 to 5.
2
Press to select [LOGICAL SEEK].
3
Press the key.
4
Press to select a set value.
• Set value : HOST / ON / OFF
5
Press the key.
6
Press the key several times to end the setting.
UNI-DIRECTIONAL BI-DIRECTIONAL
Movement of heads when
LOGICAL seek is OFF
Movement of heads when
LOGICAL seek is ON
UNI-DIRECTIONAL BI-DIRECTIONAL
[1]PRINT MODE
PASS <en t >
[1]PRINT MODE
LOG I CAL SEEK <en t >
[1]PRINT MODE
LOG I CAL SEEK :
HOS T
[1]PRINT MODE
LOG I CAL SEEK :
ON
[1]PRINT MODE
LOG I CAL SEEK <en t >